Tree Line 3ft-9.5ft!

The design of these trees are a combination of horizontal trees from Xlights (a direct screenshot from Xlights - no special modelling needed) and our stars - make for some awesome coro-based trees!  Perfect for the show without room to have a megatree or to supplement into your show that already has one!

The following trees are available, please see below for how to model within Xlights.  These use all native Xlights models.  If you are not in Xlights and/or need a custom model, please reach out so we can assist.

All trees require minimum of 4" spaced pixels.

Dwarf Spruce - 150 pixels

This tree is a total of 3.5ft tall and 16" at it's widest.  The tree portion is 100 pixels and the star is 50 pixels.  This is sold as 1 single piece/cut.  A simple pipe/rebar should hold this tree firmly in place.

Sugar Pine - 200 pixels

This tree is a total of 4ft tall and 22.4" at it's widest.  The tree portion is 150 pixels and the star is 50 pixels.  This is sold as 1 single piece/cut.  A simple pipe/rebar should hold this tree firmly in place.

Noble Fir - 300 pixels

This tree is unique in that it is tall and skinny, offering a lot of coverage with a low pixel count!  Measuring over 76" tall (over 6ft tall) and 23" wide this tree will fit in many tight spaces.  The tree portion is 200 pixels and the star is 100 pixels.  This is sold as 1 single piece/cut when pickup is available and is shipped as 2 pieces plus a zip tie bracket.  We suggest providing additional support framing to support this tree.

Giant Sequoia - 1,000 pixels

This tree is ready to impress.  Measuring just over 9.5ft tall  and 43" wide this tree fits it's name!.  The tree portion is 600 pixels and the star is 400 pixels.  This is sold as 4 pieces plus 3 oversized zip tie brackets.  You will need to create additional support framing to hold this beast up.

Use the following Xlights settings for each tree:

All trees are:
Type "Round"
Strand Direction "Horizontal"
Degrees: "180"
Rotation: "3"
Perspective: "3"

Specific settings for each tree:

Dwarf Spruce:
Bottom/Top Ration: 5
# Strings: 1
Nodes/String: 100
Strands/String: 10
Starting Location: Bottom Left
This uses a 12" star (see our page for building custom stars)

Sugar Pine:
Bottom/Top Ratio: 5
# Strings: 1
Nodes/String: 150
Strands/String: 15
Starting Location: Bottom Left
This uses a 12" star (see our page for building custom stars)

Noble Fir:
Bottom/Top Ratio: 5
# Strings: 1
Nodes/String: 200
Strands/String: 20
Starting location: Bottom Left
This uses the same settings as a 2 layer 20" star (see our page for building custom stars)

Giant Sequoia:
Bottom/Top Ratio: 4
(# of strings will vary on connection, this is generic settings for 1 port)
# Strings: 1
Nodes/String: 600
Strands/String: 30
Starting Location: Bottom Left
This uses the same settings as a 7 layer 30" star (see our page for building custom stars)