3D Printed Pipe to Coro support bracket, Universal

This mount is designed to be universal for most props.  This may not work with some HD props (example, may not work with the Infinity Spinner).

This design is meant to be easy to install, heavy duty, and last.  Fully enclosed hole.

Small spikes on the back of the prop are designed to hold in place into the coro so that drilling a 1/4" hole for bolts or zip ties is easy, accurate work and your drill bit won't walk through the flutes!  A 1/4" hole will need to be drilled through the pipe to retain the mount from sliding.

These are printed in durable UV resistant ASA plastic.

The design base is 2"x3".  Overall height is 2".  There is also a gap at the base that allows for pixel wiring to fit.   Standard bullet pixels and Twinkly lights themselves will not clear but their wiring absolutely will.  Flat style pixels (EVO, Flat Back, New Style, Magical Light Shows, etc) do fit within the channel.

3 pipe sizes include:
1/2" EMT
3/4" EMT
3/4" PVC and 1" black pipe

We don't offer 1/2" PVC for coro supports as 1/2" PVC isn't as strong as other options.