Twinkly RGB to 12mm pixel hole adapter (Pixel Tree Strip and Charlees Props)

These adapters are designed to fit Twinkly RGB Gen II lights in to 12mm pixel holes.  

These are designed to specifically work in Charlees Props coro props with 12mm holes.  These are also designed to specifically work in Megatree strip that is commonly available.

These are designed to insert in from the front in to the prop or strip - and then as the Twinkly light is inserted it will tighten in to both the prop/strip and the Twinkly light.  The few Twinkly lights, per set, that have the larger width may be a little harder to push, but these are still much easier to use than pushing directly in to coro, and hold as good or better.

These adapters are printed with PETG material and are meant for outdoor use.  Available in white or black.  Custom colors - please inquire!

These are not for Twinkly RGB+W (to be designed and released soon).

Sold in packs of 100 or 250 to best suit Twinkly counts at $0.10 each.

Please note - these are printed to order so larger quantities may take a few days.  If there is an expected delay we will notify you.